The Trinity6 6-1/2" tri-axial driver is a classic convergence of two distinctly innovative technologies. Employing Hi-Vi's ultra high frequency circular ribbon tweeter at the center of the 3-way configuration. This tweeter features a ribbon diaphragm and a metal phase plug. The midrange features a dual roll treated cloth diaphragm and a damped rear chamber. Trinity6 produces a uniquely broad sound spectrum with wide dispersion and unparalleled pure phase response. Three separate gold plated push terminal pairs are provided for tri-amping capabilities. Recommended minimum crossover 800 Hz and 8,000 Hz. This driver is being featured in a wide range of new products from in-ceiling speakers to home theater systems. Dimensions: Overall diameter 6.81", Cutout diameter 5.68", Depth 2.34".

List Price: $199.99

Price$145.00

JBL 2206H 12" High-Power LF Driver

The 2206H 12" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: • Power handling: 600 watts RMS • Voice coil diameter: 4" • Nominal impedance: 8 ohms • Frequency range: 45-3,500 Hz • Magnet assembly weight: 15 lbs. • Fs: 52 Hz • SPL: 95 dB 1W/1m • Vas: 2.2 cu. ft. • Qms: 4.5 • Qes: 0.34 • Qts: 0.32 • Xmax: 7.5 mm • Dimensions: Overall Diameter: 12-1/4", Cutout Diameter: 11", Mounting Depth: 5".

Price$445.00

JBL 2226H 15" High-Power LF Driver 8 Ohm

The 2226H 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: • Power handling: 600 watts RMS • Voice coil diameter: 4" • Nominal impedance: 8 ohms • Frequency Range: 30-2,500 Hz • Magnet assembly weight: 15 lbs. • Fs: 40 Hz • SPL: 97 dB 1W/1m • Vas: 6.2 cu. ft. • Qms: 5.0 • Qes: 0.33 • Qts: 0.31 • Xmax: 7.6 mm • Dimensions: Overall Diameter: 15-1/4", Cutout Diameter: 14", Mounting Depth: 5-1/2".

Price$503.00

JBL 2226J 15" High-Power LF Driver 16 Ohm

The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4", Cutout Diameter: 14", Mounting Depth: 5-1/2".

Price$500.00

JBL 2241H 18" High-Power LF Driver

The 2241H 18" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: • Power handling: 600 watts RMS • Voice coil diameter: 4" • Nominal impedance: 8 ohms • Frequency range: 30-3,000 Hz • Magnet assembly weight: 15 lbs. • Fs: 35 Hz • SPL: 98 dB 1W/1m • Vas: 11.0 cu. ft. • Qms: 5.7 • Qes: 0.43 • Qts: 0.40 • Xmax: 7.6 mm • Dimensions: Overall Diameter: 18-1/4", Cutout Diameter: 16-3/4", Mounting Depth: 7".

Price$795.00

JBL 2242H 18" Maximum Output LF Driver 8 Ohm

The 2242H is ideal for use in high output subwoofer systems with bass extension to 25 Hz. The total peak-to-peak excursion of the 2242H is 18 mm, within 10% linearity. The Super Vented Gap™ (SVG) series of low frequency transducers takes the patented Vented Gap Cooling™ (VGC) heat dissipation process one step further. A completely new motor structure design extends the pole piece above and below the top plate to improve gap flux symmetry and increase thermal conductivity from the voice coil to the pole piece. In addition to the benefits of Symmetrical Field Geometry™, these transducers also incorporate a copper shorting ring that is imbedded in the pole piece at the precise center of the gap and in close proximity to the voice coil. This ring results in a reduction of third harmonic distortion and a reduction of voice coil inductance, which improves the transducers' transient response. Specifications: *Power handling: 800 watts RMS *Voice coil diameter: 4" *Nominal impedance: 8 ohms *Frequency range: 25-1,600 Hz *Magnet assembly weight: 23 lbs. *Fs: 35 Hz *SPL: 99 dB 1W/1m *Vas: 10.0 cu. ft. *Qms: 5 *Qes: 0.29 *Qts: 0.28 *Xmax: 9 mm *Net weight: 29 lbs. *Dimensions: Diameter: 18-1/4", Cutout size: 16.85, Mounting depth: 8".

Price$999.00

Morel CAW 538 5" Cast Frame Woofer

The Classic Advanced line of woofers is based on Morel’s classic line - the renowned MW series. These products have high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spiders. This woofer has reinforced Ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points. Latest evolution of Morel's MW-144. Specifications: *Power handling: 150 watts RMS/1,000 watts max *VCdia: 3" *Le: .47 mH *Impedance: 8 ohms *Re: 5.2 ohms *Frequency range: 35-3,500 Hz *Fs: 49 Hz *SPL: 86 dB 1W/1m *Vas: .29 cu. ft. *Qms: 1.83 *Qes: .48 *Qts: .38 *Xmax: 3 mm *Dimensions: A: 5-5/8", B: 4-3/4", C: 2-9/16".

List Price: $199.99

Price$111.00

Morel CAW 638 6" Cast Frame Woofer

The Classic Advanced line of woofers is based on Morel’s classic line - the renowned MW series. These products have high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spiders. This woofer has reinforced Ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points. Latest evolution of Morel's MW-164, MW-166, and MW-168 woofers. Specifications: *Power handling: 150 watts RMS/1,000 watts max *VCdia: 3" *Le: .63 mH *Impedance: 8 ohms *Re: 6.4 ohms *Frequency range: 30-5,000 Hz *Fs: 43 Hz *SPL: 86 dB 1W/1m *Vas: .56 cu. ft. *Qms: 2.20 *Qes: .58 *Qts: .46 *Xmax: 4.25 mm *Dimensions: A: 6-5/16", B: 5-1/2", C: 2-3/4".

List Price: $199.99

Price$119.00

Morel CAW 938 9" Cast Frame Woofer

The Classic Advanced line of woofers is based on Morel’s classic line - the renowned MW series. These products have high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spiders. This woofer has reinforced Ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points. Latest version of Morel's MW-265 and MW-266 woofers. Specifications: *Power handling: 150 watts RMS/1,000 watts max *VCdia: 3" *Le: .61 mH *Impedance: 8 ohms *Re: 6.4 ohms *Frequency range: 20-3,000 Hz *Fs: 31 Hz *SPL: 87 dB 1W/1m *Vas: 2.00 cu. ft. *Qms: 2.59 *Qes: .80 *Qts: .60 *Xmax: 4.25 mm *Dimensions: A: 8-3/4", B: 7-13/16", C: 3".

List Price: $199.99

Price$135.00

Morel DMS 30 1-1/8" Shielded Soft Dome Tweeter

A Morel classic, the DMS 30 is a very fast tweeter capable of high dynamic range without compression of SPL. Features a single magnet system vented into a damped rear chamber which lowers resonance. Ferro fluid cooled aluminum voice coil contributes to this unit's low distortion and exceptionally smooth response. 1-1/8" treated soft dome. Also available in a magnetically shielded version, the DMS 30 * Power handling: 200 watts RMS/280 watts max * Voice coil diameter: 1-1/8" * Impedance: 8 ohms * DC resistance: 5.2 ohms * Frequency response: 1,600-20,000 Hz * Fs: 700 Hz * SPL: 90 dB 1W/1m * Net weight: 1-1/4 lbs. * Dimensions: Overall Diameter: 3-11/16", Cutout Diameter: 2-13/16", Mounting Depth: 1-9/16" (2" for DMS 30), Magnet Diameter: 2-13/16", Magnet Height: 1-7/16".

List Price: $99.99

Price$78.00

Morel DMS 37 1-1/8" Shielded Soft Dome Tweeter

The DMS 37 features a hand treated 1-1/8" soft dome, horn loading for higher efficiency, and high dynamic range without SPL compression. The magnet assembly is vented into a damped rear chamber to lower resonance and to eliminate "honking" at lower frequencies. Ferro fluid cooling provides reduced distortion and higher power handling. Specifications: *Power handling: 200 wattsRMS/280 watts max *Voice coil diameter: 1-1/8" *Impedance: 8 ohms *DC resistance: 5.2 ohms *Frequency response: 1,800-22,000 Hz *Fs: 700 Hz *SPL: 93 dB 1W/1m *Net weight: 1-1/4 lbs. *Dimensions: Overall Diameter: 3-11/16", Cutout Diameter: 2-13/16", Mounting Depth: 2-1/4", Magnet Diameter: 2-13/16", Magnet Height: 2-1/8".

List Price: $199.99

Price$73.00

Subcategories