The new generation of Dayton Audio Heavy Duty woofers features natural sounding paper cones that are chemically treated for extra durability and long life. The combination of a heavy magnet structure, vented pole piece, bumped backplate, and large voice coil provides excellent power handling capability with high efficiency and very low distortion. Unique suspension system consists of a rubber surround and large flat spider for superior damping characteristics and outstanding transient response. Made in the U.S.A. Specifications: * Power handling: 250 watts RMS/350 watts max * Voice coil diameter: 2-1/2" * Le: 1.23 mH * Impedance: 8 ohms * Re: 6.3 ohms * Frequency response: 35-3,000 Hz * Magnet weight: 56 oz. * Fs: 41 Hz * SPL: 91.7 dB 1W/1m * Vas: 1.72 cu. ft. * Qms: 9.94 * Qes: .32 * Qts: .31 * Xmax: 5.5mm * Dimensions: Overall Diameter: 10", Cutout Diameter: 9", Mounting Depth: 4-3/4", Magnet Diameter: 6-1/8", Magnet Height: 1-1/2".

The Dayton Audio Series II heavy duty woofers feature natural sounding paper cones that are chemically treated for extra durability and long life. The combination of a large magnet structure, vented pole piece, bumped backplate, and large voice coil provides excellent power handling capability with high efficiency and very low distortion. Suspension system consists of a rubber surround and large flat spider for superior damping characteristics and outstanding transient response. Made in the U.S.A. Specifications: * Power handling: 275 watts RMS/380 watts max * Voice coil diameter: 2-1/2" * Le: 3.07 mH * Impedance: 8 ohms * Re: 6 ohms * Frequency response: 25-2,000 Hz * Magnet weight: 56 oz. * Fs: 30 Hz * SPL: 92 dB 1W/1m * Vas: 4.52 cu. ft. * Qms: 10.55 * Qes: .36 * Qts: .35 * Xmax: 8mm * Dimensions: Overall Diameter: 12", Cutout Diameter: 11", Mounting Depth: 6", Magnet Diameter: 6-1/8", Magnet Height: 1-7/8".

The Dayton Audio SUB-1000 10" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 10" woofer and up to 100 watts of house-shaking power.

The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

Specifications: • Power output: 100 watts RMS • Frequency response: 30-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Dimensions: 14-3/4" H x 14-3/16" W x 15-3/4" D.

Overview Highlights

• Downward-firing flared port design for clean, powerful bass
• Selectable "Auto-on" mode
• Heavy duty long-throw 12" woofer
• Perfect for small home theaters or listening rooms
• Unobtrusive textured black vinyl finish

Big bass in big rooms mean you need to move lots of air, and there’s no substitute for square inches! Dayton Audio’s SUB-1500 powered subwoofer features an enormous, heavy-duty 15" woofer, for huge air movement and massive low end performance, plus an efficient Class-D amplifier that combines 150 watts of house-shaking power with excellent control. The bottom-firing flared port bass reflex design reduces port noise at high output, for cleaner bass that blends more effortlessly with your system and room.

The Dayton Audio SUB-800 8" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 8" woofer and up to 80 watts of house-shaking power.

The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

Specifications: • Power output: 80 watts RMS • Frequency response: 40-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Dimensions: 12-3/4" H x 12-3/16" W x 14-3/8" D.

These 3-way, 2nd order (12dB) crossovers were designed with a 3 octave spread between crossover points. Dayton metallized polypropylene capacitors are used in critical midrange and tweeter signal paths. 18 gauge inductors were used to keep DC resistance to a minimum. A unique design feature of the low pass section allows use of 4 or 8 ohm woofers, perfect for building a multi woofer system. The midrange and high pass sections are rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. 300W power handling. Board measures: 11-3/8" W x 4-3/8" H x 2" D.

Ideal for two-way sound reinforcement systems, keyboard, guitar combos. For all bass applications. Specifications: *Power handling: 200 watts RMS *VCdia: 1.5" *Le: 0.84 mH *Impedance: 8 ohms *Re: 5.88 ohms *Frequency range: 46-3,500 Hz *Magnet weight: 25 oz. *Fs: 41 Hz *SPL: 97 dB 1W/1m *Vas: 9.2 cu. ft. *Qms: 7.23 *Qes: 1.53 *Qts: 1.26 *Xmax: 3.8 mm *Dimensions: Overall Diameter: 15.15", Hole Diameter: 13.77", Mounting Depth: 5.83".

This open back 6-1/2" driver offers smooth frequency response and good senstivity, making it great for PA midrange use. Perfect for small three-way systems and for use in background sound systems.

The Alpha-6C boasts a 4-ohm impedance, increased body weight, and stiffer, more aggressive water proofing treatment on the cone making it ideal for car audio use.

Recommended for professional audio midrange applications in a sealed cabinet, or as a mid-bass in a vented satellite enclosure. Extremely smooth, extended response. Neodymium magnet for high efficiency/low weight. This lightweight motor uses a very high temperature grade of neodymium to prevent any heat related losses of magnetic efficiency. Specifications: *Power handling: 100 watts RMS *VCdia: 1.5" *Le: 0.53 mH *Impedance: 8 ohms *Re: 7.3 ohms *Frequency range: 74-5,500 Hz *Magnet weight: 4 oz. *Fs: 125.55 Hz *SPL: 94 dB 1W/1m *Vas: 0.17 cu. ft. *Qms: 6.30 *Qes: 0.61 *Qts: 0.56 *Dimensions: A: 6.59", B: 5.69", C: 2.4".

Recommended for professional audio midrange applications, also for musical instrument systems. The closed back eliminates the need for a separate sub-enclosure, simplifying installation. Great way to extend the response of bass guitar rigs. Neodymium magnet for high efficiency/low weight. This lightweight motor uses a very high temperature grade of neodymium to prevent any heat related losses of magnetic efficiency. Specifications: *Power handling: 100 watts RMS *VCdia: 1.5" *Le: 0.49 mH *Impedance: 8 ohms *Re: 7.4 ohms *Frequency range: 500-4,300 Hz *Magnet weight: 4 oz. *Fs: 500.52 Hz *SPL: 99.8 dB 1W/1m *Vas: 0.01cu. ft. *Qms: 9.09 *Qes: 1.83 *Qts: 1.53 *Dimensions: A: 6.59", B: 5.69", C: 2.4".

Recommended for bass guitar. Excellent in either sealed or vented enclosures. Specifications: *Power handling: 300 watts RMS *VCdia: 2.5" *Le: 0.39 mH *Impedance: 4 ohms *Re: 3.72 ohms *Frequency range: 52-2,500 Hz *Magnet weight: 7 oz. *Fs: 38 Hz *Sensitivity: 98 dB 1W/1m *Vas: 9.2 cu. ft. *Qms: 4.7 *Qes: 0.50 *Qts: 0.45 *Xmax: 4.5 mm *Dimensions: Overall Diameter: 15.32", Cutout Diameter: 14", Mounting Depth: 6.9".