Dayton RSS315HF-8 12" Reference HF Subwoofer 8 Ohm

The Dayton Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size. Specifications: * Power handling: 400 watts RMS/700 watts max * VCdia: 2-1/2" * Le: 1.45 mH * Impedance: 8 ohms * Re: 6.9 ohms * Frequency range: 25 - 1,000 Hz * Fs: 28 Hz * Magnet weight: 150 oz. * SPL: 86 dB 1W/1m * Vas: 2.76 cu. ft. * Qms: 3.16 * Qes: .68 * Qts: .56 * Xmax: 12.3mm * Dimensions: A: 12-3/8", B: 11-1/8", C: 5-3/8".

List Price: $199.99

Price$139.23

1 of 4

Dayton SPA500 500W Subwoofer Plate Amplifier

-NEWLY RELEASED MODEL- updated design! One of the most technologically advanced subwoofer amplifiers on the market today! The Dayton Audio SPA500 subwoofer amplifier is based on a state-of-the-art Class G circuit topology that combines the proven high power, high fidelity characteristics of a Class AB amplifier with a patented tracking down converter power supply to achieve an operating efficiency up to 86%. You get the efficiency of a Class D amplifier without compromising audio quality and reliability. The Class AB output stage provides the clean and low-distortion sound that audiophiles demand, without any of the instability problems that plague other high-efficiency amplifier designs. This American-designed and engineered amplifier uses patented circuitry that continuously tracks the input signal to modulate or control the voltage available to the output stage. This "tracking" capability delivers the exact amount of power based on demand instead of constantly keeping it in reserve, so the output stage only draws the amount of power that is required at any given time. Less energy is wasted as heat, and more power is available for the subwoofer driver. With its enhanced thermal management, the SPA500 is an upgrade over previous models—making it a nearly bulletproof amplifier choice for today's demanding HT audio and music playback applications.

List Price: $599.99

Price$359.95

1 of 3

JBL 2262HPL 338312-004X 12" Neo Woofer SRX712 SRX722 VRX932L

JBL 2262HPL 338312-004X 12" Neo Woofer SRX712 SRX722 VRX932L - Description

The JBL 2262HPL Differential Drive woofer performs better than conventional 12" PA speakers because it is engineered better. Compared with traditional driver designs, JBL's patented Differential Drive makes use of a pair of inline voice coils in separate magnetic gaps instead of a single voice coil-gap combination. This permits a more effective use of available space, and expedites efficient removal of heat from the motor structure. Specifically, the voice coils are wound reversely and are immersed in magnetic fields of opposite polarity. This ensures reduced magnetic leakage flux and focuses more magnetic energy in the gaps where it is needed. The 2262HPL is used in JBL's SRX712, SRX722, and VRX932L speaker systems. Specifications: *Power handling: 700 watts RMS/1,400 watts continuous program *VCdia: 3" *Le: 1.7 mH *Impedance: 8 ohms *Re: 5.2 ohms *Fs: 56.8 Hz *SPL: 96 dB 1W/1m *Vas: 1.74 cu. ft. *Qms: 2.79 *Qes: 0.39 *Qts: 0.34 *Xmax: 8 mm *Dimensions: A: 12-1/4", B: 11-3/8", C: 7-3/8".

List Price: $599.99

Price$399.00

1 of 3

JBL 2265HPL 338343-003X 15" Neo Woofer SRX715 SRX725 VRX915

JBL 2265HPL 338343-003X 15" Neo Woofer SRX715 SRX725 VRX915 - Description

JBL's 2265HPL Differential Drive 15" woofer is a capable, durable, touring-quality PA speaker. Compared with traditional driver designs, JBL's patented Differential Drive employs a pair of inline voice coils in separate magnetic gaps instead of a single voice coil-gap configuration. Available space is more effectively utilized, and heat is removed from the motor structure more efficiently. Specifically, the voice coils are wound reversely and are immersed in magnetic fields of opposite polarity. This ensures reduced magnetic leakage flux and focuses more magnetic energy in the gaps where it is needed. The 2265HPL is used in JBL's SRX715, SRX725, and VRX915 speaker systems. Specifications: *Power handling: 750 watts RMS/1,500 watts continuous program *VCdia: 3" *Le: 1.7 mH *Impedance: 8 ohms *Re: 5.1 ohms *Fs: 37 Hz *SPL: 97 dB 1W/1m *Vas: 6.22 cu. ft. *Qms: 3.3 *Qes: 0.36 *Qts: 0.32 *Xmax: 8 mm *Dimensions: A: 15-1/8", B: 13-7/8", C: 8".

List Price: $699.99

Price$499.00

1 of 3

JBL 2268HPL 351210-003X 18" Neo Woofer SRX718 SRX728 SRX738

JBL 2268HPL 351210-003X 18" Neo Woofer SRX718 SRX728 SRX738 - Description

The JBL 2268HPL Differential Drive 18" speaker is the driver of choice for premium, high quality professional subwoofer systems. Compared with traditional driver designs, JBL's patented Differential Drive employs a pair of inline voice coils in separate magnetic gaps instead of a single voice coil-gap configuration. Available space is more effectively utilized, and heat is removed from the motor structure more efficiently. Specifically, the voice coils are wound reversely and are immersed in magnetic fields of opposite polarity. This ensures reduced magnetic leakage flux and focuses more magnetic energy in the gaps where it is needed. The 2268HPL is used in JBL's SRX718, SRX728, and SRX738 speaker systems. Specifications: *Power handling: 800 watts RMS/1,600 watts continuous program *VCdia: 3" *Le: 1.85 mH *Impedance: 8 ohms *Re: 5.3 ohms *Fs: 33 Hz *SPL: 96 dB 1W/1m *Vas: 11.58 cu. ft. *Qms: 3.8 *Qes: 0.39 *Qts: 0.36 *Xmax: 8 mm *Dimensions: A: 18-1/8", B: 16-5/8", C: 8-7/8".

List Price: $599.99

Price$449.00

MTX Model TP1200 ThunderPro2 12in 2Way Professional Loudspeaker System

One TP1200 ThunderPro2 12in Two Way Professional Loudspeaker System. Designed for mobile DJs and musicians, these speakers are built to last with a stainless steel grille and MDF box covered with aviation grade carpet. ThunderPro 2 speakers have an X-radial design, horn-loaded tweeter for crisper highs paired with the high excursion ported woofer configurations for better low frequency response. Mobility and setup are easy with a lightweight design and easy grip handles. Reinforced and interlocking corner supports protect during moving and allow cabinets to be stacked when bigger sound is needed. With a smaller size than other pro speaker lines, the ThunderPro 2 speakers have a long throw and wide dispersion. Single woofer models can also be pole-mounted to raise the sound stage to ear level.

List Price: $199.99

Price$99.00

MTX Model TP2400 ThunderPro2 Dual 12in 2Way Professional Loudspeaker

One TP2400 ThunderPro2 Dual 12in Two Way Professional Loudspeaker System. Designed for mobile DJs and musicians, these speakers are built to last with a stainless steel grille and MDF box covered with aviation grade carpet. ThunderPro 2 speakers have an X-radial design, horn-loaded tweeter for crisper highs paired with the high excursion ported woofer configurations for better low frequency response. Mobility and setup are easy with a lightweight design and easy grip handles. Reinforced and interlocking corner supports protect during moving and allow cabinets to be stacked when bigger sound is needed. With a smaller size than other pro speaker lines, the ThunderPro 2 speakers have a long throw and wide dispersion. Single woofer models can also be pole-mounted to raise the sound stage to ear level.

List Price: $299.99

Price$199.00

QSC RMX 1450 Power Amplifier 1200 watt

QSC RMX 1450 Power Amplifier - Description

The new RMX Series amplifiers from QSC offer true professional quality performance at a new affordable price. Models range in power from 430 watts to 1,200 watts per channel at 2 ohms, all in a compact chassis only 2 rack spaces high and less than 16" deep. XLR and 1/4" balanced inputs and Neutrik Speakon® and binding post outputs allow users a convenient choice of connectors, while user-defeatable clip limiters and selectable low-frequency filters optimize sonic performance. The RMX1450 is rated at 280W into 8 ohms, 450W into 4 ohms, 700W into 2 ohms (0.1% THD @ 1 kHz) and 1,400W into 4 ohms bridged mono (1% THD @ 1 kHz).

List Price: $999.99

Price$799.99

1 of 2

QSC RMX 850 Power Amplifier 830 watt

QSC RMX 850 Power Amplifier - Description

The new RMX Series amplifiers from QSC offer true professional quality performance at a new affordable price. Models range in power from 430 watts to 1,200 watts per channel at 2 ohms, all in a compact chassis only 2 rack spaces high and less than 16" deep. XLR and 1/4" balanced inputs and Neutrik Speakon® and binding post outputs allow users a convenient choice of connectors, while user-defeatable clip limiters and selectable low-frequency filters optimize sonic performance. The RMX850 is rated at 200W into 8 ohms, 300W into 4 ohms, 430W into 2 ohms (0.1% THD @ 1 kHz) and 830W into 4 ohms bridged mono (1% THD @ 1 kHz).

List Price: $899.99

Price$619.99

1 of 6

Saga Elite 2 Channel Class D Stereo Amplifier, 300 Watts RMS (Per Channel into 4 Ohms)

Saga Eliteï¿½ 2 Channel Class D Stereo Amplifier, 300 Watts RMS (Per Channel into 4 Ohms) Saga Amps are known for always delivering a little more power and features than you would usually expect. The new SAG3001 is no exception! This Saga 2 Channel Stereo Amplifier delivers 300 Watts of RMS power and if you want even more powerï¿½. Switch over to the Bridged Mode and deliver 600 Watts of Monaural Power. It's constructed with high-quality components and carefully designed circuitry to ensure excellent audio performance and an extremely linear frequency response. By using a combination of steel and aluminum this little power house 1u amp weighs in at a tiny 7.3lbs. The Class D power technology offers increased efficiency, better airflow, and a smaller footprint for easy transportation and installation. This amplifier guarantees total reliability even in the most demanding conditions and is equipped with a super quiet cooling fan. Stereo Power When in Stereo Mode, this amplifier can send 300 Watts of RMS power to two separate channels @ 4 ohms. Each channel operates independently and has its own input connectors, sensitivity level controls, signal indicator LEDs, automatic limiter, fault protection circuitry, and speaker outputs. Bridged (Mono) 600 Watt RMS Power When you need to deliver more power to a single unit, simply switch the amplifier to Bridged Mode. When in Bridged Mode, the two internal amplifiers (CH1 and CH2) form a single, higher powered amp. This is especially useful when using the amplifier to power a subwoofer. No need to worry about overworking the amp either because each channel is independently protected in Bridged Mode. Easy Access This amp's easy-to-operate front panel controls make for a simple set up. The front mounted gain controls allow you to adjust the power to your components with ease. Rack Ear Mounting The SAG3001 comes equipped with Rack Ears as standard equipment for easy rack mounting.

List Price: $499.99

Price$399.00

Yung SD100 100W Class D Subwoofer Amp Module No Boost

Yung SD300 300W Class D Subwoofer Amp Module No Boost

Yung SD300-6 300W Class D Subwoofer Amp Module with 6 dB @ 30 Hz