If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x (10" Front, 4.5" Back) W x 14.5" D. Note: Cabinet dimensions do not include grill

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x (10" Front, 4.5" Back) W x 14.5" D. Note: Cabinet dimensions do not include grill

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x (10" Front, 4.5" Back) W x 14.5" D. Note: Cabinet dimensions do not include grill

The Usher UA701 was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized, pre-assembled crossover. A user-supplied 0.75 cu. ft. cabinet is required to complete this kit – all other components are included. The perfect speaker project for anyone who enjoys designing and constructing their own enclosures! The Usher UA701 is also available with cabinet, in a variety of styles and finishes. Specifications: *Impedance: 4 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power handling: 80 watts RMS *Recommended cabinet internal volume: 0.75 cu. ft.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D. * Designed by Joe D’Appolito * Studio monitor-type accuracy (± 1.7 dB from 100 Hz - 20 KHz) * Low 41 Hz -3 dB point * Very rich, real wood cherry veneer cabinet * Power Handling: 80 watts RMS * Impedance: 8 ohms * Cabinet dimensions: 17" H x 10" W x 12.5" D * Pre-assembled crossovers Now shipping with pre-assembled crossovers. No more soldering! Dayton Audio® loudspeaker kits are designed to offer the speaker-building hobbyist truly high-end sound quality and aesthetic appeal. Because they are based on the Dayton Audio finished loudspeaker cabinets, the appearance of these systems is world-class. Your choice of three beautiful exterior surfaces (gloss black, cherry, and maple) and two styles (straight- or arc-sided) is sure to blend with any decor. All engineering from cabinet to crossover was done in the U.S.A., ensuring Dayton Audio speakers will faithfully reproduce the music that you know, with tonal qualities that you prefer. Strong bass and a very smooth top end without unnatural midrange glare are traits common to all Dayton Audio designs. The superb performance of these speakers is guaranteed; the choice of which one is for you should be based on cabinet size, output requirements, driver preference, and personal cosmetic appeal. Although Dayton Audio kits can be assembled by a beginner in one or two hours, the speaker systems' acoustical performance reveals their superb technical pedigree. Since these speakers are in kit form, you will realize substantial savings by building them yourself. All woodworking has been done; assembly consists of securing drivers and ports, attaching damping materials, and wiring the crossovers and drivers. The process does not require expensive tools or measurement equipment—a general knowledge of electronics is helpful but not required. Crossover networks are completely pre-assembled and ready to connect to the drivers and input terminals using the supplied wires and push-on terminals. No soldering required! Dayton Audio offers a completely new level of quality previously unavailable in commercially available loudspeaker kits. All of the critical aspects of high-end loudspeaker design and manufacturing have finally been combined into the ultimate DIY kit-building experience. You can own a finished speaker system rivaling those found at exotic high-end salons, and best of all you'll be able to say "I built it myself!"

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

The Usher 701 is a classic two-way bookshelf system possessing accuracy, detail, and a transparency that must be heard to be believed! The bass response is articulate and effortless, the midrange is balanced and extremely accurate, and the high frequencies are smooth yet detailed. This speaker kit was created for Dayton Audio by world-renowned audio authority Dr. Joseph D'Appolito. Dr. D'Appolito's engineering prowess, in combination with the Usher 9930 1-1/8" tweeter and 8945A 7" woofer, has produced what we feel is one of the most exciting speaker kits available. Joe D'Appolito designed a speaker that is smooth and non-fatiguing, with accuracy rivaling that of many commercial studio monitors. Proven-quality components are used in the superbly optimized pre-assembled crossover. The speaker's on-axis frequency response is flat within ± 1.7 dB from 100-20,000 Hz. Dr. D'Appolito summed up the Usher 701 kit perfectly when he said, "I'm quite satisfied with the results!", and you will be too! This speaker is reasonably priced and easy to assemble, making it perfect for any audiophile—novice or experienced. Available in choice of cabinet finishes (gloss black, cherry, maple), and in straight- or arc-sided versions. Sold individually. Specifications: *Impedance: 8 ohms *Frequency response: 41 - 20,000 Hz *SPL: 86.5 dB 2.83V/1m *Power Handling: 80 watts RMS *Cabinet dimensions: 17" H x 10" W x 12.5" D.

Dayton Audio's Dr. Joseph D'Appolito-designed UA711 speaker exhibits well-behaved and consistent coverage both horizontally and vertically. A 2 kHz crossover point contributes to the excellent transition between the Usher 9950C-15 tweeter and Usher 8836AC 7" woofer. The diminutive UA711 excels as surrounds or the main L/R speakers in moderately sized rooms. The Usher woofer's response can reach down to around 50 – 60 Hz, which is appropriate for many listening situations. For realistic home theater use, or as part of a music playback setup, the UA711 can also be used with a subwoofer to create a bigger "full range" sound. Thanks to the smooth, gentle sealed-box roll off, a THX-recommended low-frequency crossover of 80 Hz is easy to implement if required. A user-supplied 0.5 cu. ft. cabinet is required to complete this kit – all other components are included, even pre-assembled crossovers! The perfect speaker project for anyone who enjoys designing and constructing their own enclosures! The Usher UA711 is also available with cabinet, in a variety of styles and finishes. Specifications: *Impedance: 8 ohms *Frequency response: 54 - 20,000 Hz *SPL: 87 dB 2.83V/1m *Power handling: 70 watts RMS *Recommended cabinet internal volume: 0.5 cu. ft.

Dayton Audio's Dr. Joseph D'Appolito-designed UA711 speaker exhibits well-behaved and consistent coverage both horizontally and vertically. A 2 kHz crossover point contributes to the excellent transition between the Usher 9950C-15 tweeter and Usher 8836AC woofer. The diminutive UA711 excels as surrounds or the main L/R speakers in moderately sized rooms. The Usher woofer's response can reach down to around 50 – 60 Hz, which is appropriate for many listening situations. For realistic home theater use, or as part of a music playback setup, the UA711 can also be used with a subwoofer to create a bigger "full range" sound. Thanks to the smooth, gentle sealed-box roll off, a THX-recommended low-frequency crossover of 80 Hz is easy to implement if required. Specifications: *Impedance: 8 ohms *Frequency response: 54-20,000 Hz *SPL: 87 dB 2.83V/1m *Power handling: 70 watts RMS *Cabinet dimensions: 14" H x 8.5" W x 12.5" D *Curved cabinet dimensions: 14" H x (8.5" Front, 4.5" Back) W x 13" D *Sold individually.