The Maverick™ 12" guitar speaker with patent-pending FDM™ technology puts tonal control at your fingertips. Just turn the modulator knob to adjust speaker output and amplifier interaction, helping you find that sweet spot of saturated tube tone but at a significantly lower volume. Tweak the knob for a wide range of tones: more attenuation affords a warmer tone, while less attenuation restores volume and brightness. The Eminence Maverick features a stamped steel frame, 38 oz. ceramic ferrite magnet, Zurette dustcap, and a full molded paper cone with paper edge. Specifications: *Power handling: 75 watts RMS *VCdia: 1.75" *Impedance: 8 ohms *Frequency range: 75-5,200 Hz *SPL: 91.5 dB (No knob turn), 100 dB (Full turn) *Dimensions: A: 12.03", B: 10.95", C: 6.56".

Nothing says "American Made" like rock 'n roll or blues. And nothing says "Classic" tone like the Patriot™ Series of guitar amp speakers from Eminence. Made in the U.S.A. for stand-up volume and reliable rockin' clarity. Seven-year manufacturer's warranty. Nice warm, fat tone with a little top end bite and clarity. Very touch-sensitive with a hint of British flavor. Copper voice coil on polyimide former, ceramic ferrite magnet, pressed steel basket, paper cone. Specifications: *Power handling: 150 watts RMS *VCdia: 2" *Impedance: 4 ohms *Frequency range: 70-4,200 Hz *SPL: 99 dB *Dimensions: A: 12.02", B: 10.97", C: 5.1".

The Eminence PSD:3006-8 8 ohm 2" horn driver features a geodesic titanium dome design for increased strength and stiffness. Ideal for high-power, high-output professional sound reinforcement applications. Replacement diaphragm available. Specifications: *Power handling: 80 watts RMS (AES500 specification with x-over >500 Hz, exc. 24 dB/octave), 115 watts RMS (AES800 specification with 800 Hz x-over  12 dB/octave) *Impedance: 8 ohms *Frequency range: 500-18,000Hz *Sensitivity: 111.4 dB (1W/1m across 500 Hz-18 kHz) Magnet weight: 80 oz *Dimensions: 7.9" diameter x 3.1" depth.

Replacement diaphragm for Eminence PSD:3006 8 ohm titanium compression drivers.

Eminence px cabinet-ready crossovers feature advanced circuit design to both preserve the crossover and your HF drivers. A common crossover problem is L-pad failure brought about by winding burnout when maximum attenuation is prolonged. Full attenuation concentrates the maximum voltage drop in a small winding area - a potentially damaging state even with high-power L-pad devices. In px crossovers, current is limited when the high frequency level control is set to '0' on its scale (±9 dB attenuation). A secondary benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence px crossovers are a technically superior product. For use with 8 ohm drivers.

Eminence px cabinet-ready crossovers feature advanced circuit design to both preserve the crossover and your HF drivers. A common crossover problem is L-pad failure brought about by winding burnout when maximum attenuation is prolonged. Full attenuation concentrates the maximum voltage drop in a small winding area - a potentially damaging state even with high-power L-pad devices. In px crossovers, current is limited when the high frequency level control is set to '0' on its scale (±9 dB attenuation). A secondary benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence px crossovers are a technically superior product. For use with 8 ohm drivers.

Eminence px cabinet-ready crossovers feature advanced circuit design to both preserve the crossover and your HF drivers. A common crossover problem is L-pad failure brought about by winding burnout when maximum attenuation is prolonged. Full attenuation concentrates the maximum voltage drop in a small winding area - a potentially damaging state even with high-power L-pad devices. In px crossovers, current is limited when the high frequency level control is set to '0' on its scale (±9 dB attenuation). A secondary benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence px crossovers are a technically superior product. For use with 8 ohm drivers.

Eminence px cabinet-ready crossovers feature advanced circuit design to both preserve the crossover and your HF drivers. A common crossover problem is L-pad failure brought about by winding burnout when maximum attenuation is prolonged. Full attenuation concentrates the maximum voltage drop in a small winding area - a potentially damaging state even with high-power L-pad devices. In px crossovers, current is limited when the high frequency level control is set to '0' on its scale (±9 dB attenuation). A secondary benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence px crossovers are a technically superior product. For use with 8 ohm drivers.